- How to Install: Simply plug the blinker relay into the corresponding power outlet. If your relay plug is different from our product, please connect the red wire to the negative terminal of the power supply, and the black wire to the positive terminal
- Fixing Hole Design: The LED blinker relay is suitable for both led lights and halogen lights. Designed with a 0.21-inch diameter fixing hole, it can be fixed to a reasonable part of the frame with hook screws, etc. No need to tap wires to install load resistors
- Flash Relay Functions: The relay 12V not only controls the circuit to make the flash lights come on and sends out brake signals at normal frequency, but also quickly identifies and fixes unstable voltages, and other causes of flickering problems
- Widely Applicable: Our LED turn signal relay measures 1.61*1.26*1.06 inches and is rated at 12V, operating temperature from -40°C/-104°F to +80°C/+176°F, the standard model is suitable for most motorcycles, applies to both turn signals and warning lights
- Premium Quality: The LED flasher relay 2 pin added with fully encapsulated waterproof cover on the outside of the relay's wires and plug elements, has good durability and waterproof, even in harsh environments such as rainstorms and snowstorms
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
