Deburring External Chamfer Tool with Tungsten Carbide Blade, Deburring Chamfering Drill Bit, Repair Tools for Damaged Screws, Bolts and Fasteners, Quick Release Hex Shank, Fits for 3/16"-1"(5mm-25mm) drill bit deburring drill bits metalworking chamfering and deburring tools remove burr tools deburring three-blade chamfering device stainless steel deburring tool 3-in-1 chamfering tool rounding tool manual hexagonal chamfer drill reamer deburring tool for metal deburring external chamfer tool tungsten steel hex shank deburring outer chamfer deburring external chamfer tool with carbide blades deburring external chamfer tungsten steel remove burr drill bit tool manual chamfering and deburring tools tungsten carbide deburring chamfer tool drill bit metal external chamfer deburring tool set external thread repair tool pvc chamfer tool deburring tool edge burr remover internal/external tubing deburring tool 1/4-3/4" indexable 82° countersink & chamfer tool (2001-0036)
- 【Upgraded Tungsten Carbide Blade】Compared to HSS materials used in other similar products, tungsten carbide is a superior material that is sharper, more wear-resistant, and has a longer lifespan. Tungsten carbide tools can withstand a higher temperature than steel. They usually produce a better finish during cutting, providing a cleaner and smoother cut.
- 【Safe and Cost-effective】The Deburring and Chamfering tool can easily shave off the outer edges of screws/bolts/pipes/rods and remove burrs. It can quickly repair damaged bolts and tighten nuts in place without hurting your hands, no sparks, and no burns. You do not need to spend time and money to find hard-to-find or expensive replacement bolts, simplifing the repair process.
- 【Wide Application】The 3-in-1 chamfering tool takes a large working diameter (3/16”-1”, 5mm-25mm). Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic and so on.
- 【Top Design】The tungsten carbide deburring chamfer tool adopts a 1/4" hexagonal shank,can be compatible with most equipment on the market. The hollow-carved design facilitates chip removal while it is deburring, which can reduce the accumulation of debris during cutting.
- 【Easy to Use】Attaching the deburring external chamfer tool to the end of your electric drill, starting with a lowest speed, then slightly apply pressure to remove the burr and increase the speed as needed. Note: Do not turn on the driver until the bit fully covers the screw/bolt. Otherwise, the drill bit would bump over the screws/bolts, making it difficult to control.
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
