Features

The Design House 753533 Coventry 2-Way Latch Entry Handle Set accepts a key on one side of the lock but is operated by a handle on the other side. Finished in satin nickel and designed for left or right hand doors, this knob and keyway fit the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back doors. Use this knob on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.

Finished in satin nickel and designed for left or right hand doors
ANSI Grade-3 Certified for residential security
Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
Handle Set includes single cylinder deadbolt, exterior handle and interior passage knob/lever.
5-Year limited mechanical/5-Year limited finish warranty

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty

Specs

In the Box:

(1) Design House 753533 Coventry Handleset with Cambridge Interior Knob and Single Cylinder Deadbolt Satin Nickel

Design House Design House 753533 Coventry Handleset w

Features

Specs

Specs

Best sellers in Tools & Garden