★ MEASURE YOUR TABLE & UMBRELLA POLE BEFORE ORDER. ★ This umbrella wedge might have a pre-cut seam at one side for better-fit the umbrella pole, and it works fine inside the patio table hole. ▼ Fits umbrella pole diameter 1 1/2 inch (38mm) ; Table hole opening / umbrella weight base hole diameter 1.8 to 2.4 inch (see images). ▼ Twist / rotate the cone wedge shim to fit in table hole. ▼ Lubricating oil / soap-suds / vaseline / sanding might be helpful in installation. ▼ No more swaying / wobbly umbrella. ▼ Curved (see engineering drawing in second images) Tapered Design keeps the Umbrella properly seated and eliminates any rattles. ▼ Rubber Umbrella Cone Wedge Shim works with any table and umbrella combination, helps to keep the umbrella properly centered over the table. ▼ Installs in seconds and is easily removed for storage. We have two sizes for umbrella poles in diameter: 1 1/2" (38mm) or 1 3/8" (35mm). ▼ Additional 4 holes on the top for inserting flowers, pen, or table sign. ▼ 100% Brand New & Extra weather-resistant material used for outdoors. ★ Installation: 1. Draw out the umbrella and pole from the hole on the patio table. 2. Install the Myard Cone Wedge Shim onto the umbrella pole. 3. Insert the umbrella and pole back to the hole on the patio table. 4. Spin and push the Cone Wedge Shim downard gently in order to have it sinked into the hole compactly. (lube / oil / vaseline might help in doing this) 5. DONE
- ★ MEASURE YOUR TABLE & UMBRELLA POLE BEFORE ORDER: ▼ Rubber material that can compress and hold in place better than a plastic ring plug. ▼ This umbrella wedge might have a pre-cut seam at one side to better fit. ▼ Application 1: Fit the umbrella weighted base. ▼ Application 2: Works fine inside the patio table hole.
- ★ ADJUSTABLE SIZING ( FOR SPECIFIC RANGE ) : ▼ Fits umbrella poles up to 1 1/2 inches (38mm) in diameter ▼ Fits table opening diameter / umbrella base hole diameter from 1.8 to 2.4 inches (see images) ▼ Twist / rotate the cone wedge shim to fit in table openings. ▼ Lubricating oil / soap-suds / vaseline / Sanding might be helpful in installation.
- ★ WEATHER-RESISTANT, HOLDS UMBRELLA SECURELY: ▼ Curved (see engineering drawing in second images) Tapered Design keeps the umbrella pole properly centered over the table, prevents it from hitting the glass table top when it's windy, and eliminates any rattles. ▼ Tight fit, works with table and umbrella combination. ▼ 100% Brand New & Extra weather-resistant, thick and soft material, provides durability.
- ★ INSTALLATION STEPS: 1. Draw out the umbrella and pole from the hole on the patio table. 2. Install the Myard Cone Wedge Shim onto the umbrella pole. 3. Insert the umbrella and pole back to the hole on the patio table. 4. Spin and push the Cone Wedge Shim downard gently in order to have it sinked into the hole compactly. (lube / oil / vaseline might help in doing this) 5. DONE
- ★ EASY REMOVE & STORAGE: ▼ Simply twist and rotate, installs in seconds, and is easily removed for storage, the umbrella wedge is a must-have for your patio umbrella ▼ Additional 4 holes on the top for inserting flowers, pen, or table sign.▼ We have two sizes for umbrella poles in diameter: 1 1/2" (38mm) or 1 3/8" (35mm). No more swaying / wobbly umbrella!
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
