If you've been using a hammer or a hand stapler, it's time to upgrade. This 2-in-1 tool is lightweight, but it's more than powerful enough to get the job done. Put your new tool to the test and get started installing trim, light wire fencing, base boards, picture frames, crates, window casings, cabinetry, and any other projects you can think of.

• Nailed It: This 2-in-1 tool features durable and lightweight aluminum construction, an anti-vibration comfort grip, and tool-free adjustable depth for multiple applications. It's ideal for decorative trim, chair rail, baseboards, window casing, and shoe and crown moulding.
• Ultimate Versatility: This nailer can use two types of fasteners – 18 gauge brad nails and 18 gauge 1/4" narrow crown staples. It can accommodate nails ranging from 3/8" to 2", and staples ranging from 1/2" to 1-5/8". It's useful for a wide range of projects, with an operating pressure from 60-110 PSI.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing.
• MAGAZINE CAPACITY: 100 pcs

Step 1: Connect to Your Compressor

Set your compressor to 60 PSI and use your air hose's quick-connect fitting to connect your tool. If you need to, you can safely increase the pressure up to 110 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 2: Load Fasteners

Squeeze the latch at the back of the magazine and pull back.

Staples go on the middle bar of the magazine. Brad nails sit in the bottom groove on the left side.

Squeeze the back lever and push the magazine closed. Release the lever to secure your fasteners.

Step 3: Make Adjustments

Change the firing depth using the wheel on the right side - clockwise increases depth, counterclockwise decreases it. The fastener should sit flush to your finished surface.

The 360º air exhaust can be rotated to keep air from blowing in your face. Or, use it to blow debris away from your workspace!

Step 4: Test and Go

Now is the time to fine-tune your PSI and to practice firing. If the nailer is leaving a large dent in your work surface, lower your PSI or adjust the driving depth.

Pro Tip: Use a piece of scrap material to test out your nailer before starting on the real thing!

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty