- 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask
- GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup
- FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes
- DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power
- ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability
- User Manual (PDF)
Warranty: 90 Day Woot Limited Warranty
Shipping Note: Shipping to Alaska, Hawaii, and PO Boxes is not available for this item
Specs
In the box: SereneLife Inverter MIG Welding Machine+Starter Kit includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask
Technical Specs: Model - SLMIGWL140.3
- Construction Material: Metal
- Power Supply: 110V/220V (13A Power Adapter)
- Maximum Input Current: 110V/43.1A, 220V/21.5A Frequency Response: 50/60Hz
- Rated Input Power: 8.1KVA Current & Voltage Adjustment Range (MIG, A/V) : (50A/16.5V-130A/20.5V) 25℃60%
- Utilization Factor Output (MIG, A/V): (130A/20.5V) 40℃100%
- Utilization Factor Output (MIG, A/V) :（100A/19V） No-load Voltage: 42V Usable Wire: 0.2''-0.3'' -inch
- Wire Feed Rate: 3-15m/min
- Power Factor: 0.73
- Efficiency: 85%
- Shell Protective Grade: IP21S
- Insulation Grade: F
- Welding Output: 60-125A,AC
- Capacity: 18 gauge (0.039") to 3/16" (0.24") mild steel only
- Duty Cycle: 20% @ 90 A
- Open Circuit Voltage: 30V 2.67KVA
- Welder Tips / Wire Size Installed tip will accept 0.031" Flux-Core wire Wire Spool Capacity: 2.2 lbs.
- Spool Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance)
- Extension Cord Recommendations: 3 conductor #12A or larger up to 5.91 ft.
- Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off)
- Product Dimension (L x W x H): 15.7'' x 6.7'' x 11.8'' -inches
- Sold as: 1
- Weight: 21.06 lbs.
