Before initially using this product in your spa or hot tub you will need to add 1/2 oz. of sodium bromide for each 100 gallons of water. The same treatment must be followed each time you drain and refill your spa or hot tub with fresh water. Introduce 3 tablets per 300 gallons of spa water with the use of a floating tablet feeder or automatic brominator installed on the spa equipment. Adjust tablet feeder or brominator to obtain an active bromine residual of at least 2 ppm. Maintain spa by adding 3 tablets per 300 gallons every 5-7 days or as needed to maintain an active bromine residual of 2 ppm at all times. Spa water has a tendency to foam and cloud; this is directly proportional to the amount of spa use. Cloudiness is due to the accumulation of body fats, oils, and contaminants too small for the filtration equipment to remove, and is linked to the rapid escalation of total dissolved solids in the water. To a great extent, defoamers, clarifiers, as well as shock treatments and demineralizers, or sequestering agents can be used to clear the water. When water clarification cannot be achieved, drain, clean, and refill the spa.
- Bromine tablets for spa hot tub
- Introduce 3 tablets per 300 gallons of spa water with the use of a floating tablet feeder
- Maintain spa by adding 3 tablets per 300 gallons every 5-7 days or as needed
- Before initially using this product in your spa or hot tub you will need to add 1/2 ounces of sodium bromide for each 100 gallons of water
- Bromine is an alternative to chlorine as a way to sanitize spa or hot tub water
- Bromine does not give off much of an odor compared to chlorine
- Bromine yields silky smooth water
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
