Free shipping for Prime members. Learn more
Woot! customers who are Amazon Prime members can enjoy special shipping benefits on Woot!, including:
Amazon Prime membership required. See individual offer pages for shipping details and restrictions. Not valid for international shipping addresses.
Get started by logging in with Amazon or try a 30-day free trial of Amazon Prime*
Login with Amazon Try a 30-day free trial of Amazon Prime*Re-login required on Woot! for benefits to take effect
Give your car subs a boost with the Taramps HD 3000 Watt 1 Ohms Amplifier. You'll be able to experience a crisp, clear sound as you jam out on every drive. The amplifier operates at 1 ohms with 3,000 Watt RMS for maximum power. The mono amplifier is full-range and can operate on all frequencies when using the right measure.
In order to use the amplifier, you'll need at least 9 VDC of the minimum voltage supply. This compact amp shows much versatility as the sound booster is ideally made for most car speaker applications, but best with phenolic drivers. With a built-in 3-speed fan, the motor vehicle amplifier is able to showcase thermal management and prevent the device from overheating, ensuring long-lasting use and durability.
Roll those windows down, and turn up the tunes with the Taramps HD Class D Mono Amplifier.
Audio Boost:
Maximum Power:
Full Range:
Stays Cool:
Versatile:
Check out the User Manual
Shipping Note: Shipping to Alaska, Hawaii, P.O. Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
| Specifications | |
|---|---|
| Operation Class: | Class D |
| Number of Channels: | 01 |
| Maximum Power: |
@12.6VDC - 1 Ohms: 3,000 Watts RMS @12.6VDC - 2 Ohms: 2,025 Watts RMS @12.6VDC - 4 Ohms: 1,140 Watts RMS |
| Input Sensitivity: | 230mV |
| Signal to Noise Ratio: | 89 dB |
| Frequency Response: | 10Hz Hz ~ 20 kHz (-3dB) |
| Crossover High Pass (HPF): | 10Hz ~ 80 Hz (-12dB/8ª) Variable |
| Crossover Low Pass (LPF): | 80Hz ~ Full (-12dB/8ª) Variable |
| Bass Boost: | 0 ~ 10.5dB (5 Hz) |
| Thermal Management: | Smart Cooler (fan controlled by temperature or audio, with 3 speeds) |
| Efficiency: | 79% |
| Input Impedance: | 18K ohms |
| Output Impedance: | 1 Ohm |
| Protection System: | Output Short Circuit / High or Low Supply Voltage / Thermal Protection |
| Minimum Supply Voltage: | 9 VDC |
| Maximum Power Supply Voltage: | 16 VDC |
| Consumption at Rest: | 1.8A |
| Maximum Music Consumption: | @12.6VDC: 150.5A |
| Maximum Consumption in Sinusoidal Signal: | @12.6VDC (1kHz): 301A |
| Dimensions (WXHXD): | 9"x 2.56" x 7.32" (229 x 65 x 186mm) |
| Weight: | 4.4-lbs. (2Kg) |
| EAN: | 7898556840903 |
In the Box:
| Specifications | |
|---|---|
| Operation Class: | Class D |
| Number of Channels: | 01 |
| Maximum Power: |
@12.6VDC - 1 Ohms: 3,000 Watts RMS @12.6VDC - 2 Ohms: 2,025 Watts RMS @12.6VDC - 4 Ohms: 1,140 Watts RMS |
| Input Sensitivity: | 230mV |
| Signal to Noise Ratio: | 89 dB |
| Frequency Response: | 10Hz Hz ~ 20 kHz (-3dB) |
| Crossover High Pass (HPF): | 10Hz ~ 80 Hz (-12dB/8ª) Variable |
| Crossover Low Pass (LPF): | 80Hz ~ Full (-12dB/8ª) Variable |
| Bass Boost: | 0 ~ 10.5dB (5 Hz) |
| Thermal Management: | Smart Cooler (fan controlled by temperature or audio, with 3 speeds) |
| Efficiency: | 79% |
| Input Impedance: | 18K ohms |
| Output Impedance: | 1 Ohm |
| Protection System: | Output Short Circuit / High or Low Supply Voltage / Thermal Protection |
| Minimum Supply Voltage: | 9 VDC |
| Maximum Power Supply Voltage: | 16 VDC |
| Consumption at Rest: | 1.8A |
| Maximum Music Consumption: | @12.6VDC: 150.5A |
| Maximum Consumption in Sinusoidal Signal: | @12.6VDC (1kHz): 301A |
| Dimensions (WXHXD): | 9"x 2.56" x 7.32" (229 x 65 x 186mm) |
| Weight: | 4.4-lbs. (2Kg) |
| EAN: | 7898556840903 |
In the Box:
| 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|---|
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
|---|
