JNH Lifestyles Joyous 2-Person Sauna

Oh Wow I just got my Sauna and put it together right away. I have used it several times now. I have to hand it to this company, the quality of the engineering of this thing is perfect, the parts fit perfectly and it was put together (alone) in about 30 minutes, though I recommend two people working on it, because lifting the heavy parts are a little much for a single person. Plugged it in and as soon as it had "burned in" I tried it out. Everything worked perfect~! Used it several times sense. I have started off with 30 minutes at 110 degrees will increase time and temperature as soon as I know what is comfortable. The heating elements never get so hot that touching them would give you a burn, though I have a bad habit of putting my feet against the lower ones. It heats up in less than 15 minutes. Good part. Excellent quality, engineering and planning for the price. Bad part: Well they really need to work on the instructions. Much can be done to improve this. Though common sense tells you how to put together a box. First trying to get all on one page while leaving the back unused is a mistake on their part. Darker larger pictures would be an improvement. They need to say more about the electrics such as the speakers music attachment and mood light etc. After all this is about the only thing I had a question on. One last thing is that they tell you to unplug the unit after each use. Now if you are pulling that plug out each time you use it, soon you will have a problem. A master switch to turn off the transformer would be much more practical. If you have not special switch wired for it, I would suggest a small switched power strip such as is used with computer equipment. A couple of other hints. In attaching the heating units. Put the bottom screw in first so you can tilt the unit to see the hole, then you can see the top one just looking down. I learned this the hard way, stabbing a hole I could not see was a problem. Also leave the two elements toward the front off until you have placed the seat front in. If you are like me and do this backwards, no worry, just unlatch the front latches of bottom sides and slightly splay the sides out gently to make room for sliding this in. No scratches, No problem. I will be sending pictures when the project is complete as I am making a special place for the unit.